Home Forum Index
Help  Help
Welcome, Guest. Please login or register.



Search:     Advanced search
*
Versigo Forum  »  Trade Members  »  Trade Access  »  Topic: Biometrics
Pages: [1] Go Down
Topic: Biometrics  (Read 1304 times) Print
Buster
Group: Installer - Multi Role
Position: Sr. Member
***


Karma: +1/-1
Offline Offline

Posts: 322
« on: April 02, 2011, 10:13:49 PM »
We have a Net2 system spread over 5 sites with prox readers fitted (some external on entrance doors and gates/barriers). We have been asked to replace the prox readers with fingerprint readers. Can anyone recommend a quality reader that is suitable for internal/external use that is compatable with net2
 IP: [ Logged ]
Peter James

Group: Founder
Position: Hero Member
***


Karma: +67/-5
Online Online

Posts: 5426
« Reply #1 on: April 02, 2011, 10:27:24 PM »
Can you use a different protocol on Net 2 ? I thought Paxton will only let you use their own readers?
 IP: [ Logged ]
Buster
Group: Installer - Multi Role
Position: Sr. Member
***


Karma: +1/-1
Offline Offline

Posts: 322
« Reply #2 on: April 02, 2011, 10:32:31 PM »
We have systems with Identec cryptag wiegand 26bit and Motorola readers. Paxton list a few including ievo and bioscyrpt but i,ve not used any of them
 IP: [ Logged ]
cubit

Group: Installer - Multi Role
Position: Hero Member
***


Karma: +0/-0
Offline Offline

Posts: 633
« Reply #3 on: April 02, 2011, 10:43:32 PM »
Quote from: Buster on April 02, 2011, 10:13:49 PM
We have a Net2 system spread over 5 sites with prox readers fitted (some external on entrance doors and gates/barriers). We have been asked to replace the prox readers with fingerprint readers. Can anyone recommend a quality reader that is suitable for internal/external use that is compatable with net2
Key point to look for is the Bio reader has a weigand/C&D output.

All have their weaknesses.

Don't expect miracles from a fingerprint biometric.
(that's polite way of saying most are toot.).
 IP: [ Logged ]
Zak

Group: Founder
Position: Hero Member
***


Karma: +2/-0
Offline Offline

Posts: 567
« Reply #4 on: April 03, 2011, 11:33:59 PM »
Paxton have a couple of papers on compatible biometric readers on their site.
We used an Ingersoll Rand one with a Net2 last year.
-------------------------------
Disclaimer: Any comments or opinions expressed by me are my own as a member of the public and not of my employer or Company.
 IP: [ Logged ] WWW
Paul

Group: Installer - Multi Role
Position: Hero Member
***


Karma: +41/-11
Offline Offline

Posts: 10123

We strive to help, but it is chargeable.
« Reply #5 on: April 03, 2011, 11:54:05 PM »
They work fine in the summer, bit of coldshire and go tits up if not shielded.
Outputs can be intergrated into anything.
-------------------------------
My views are mine, like them or not most often they are right.
When they are wrong, you did not read the answer correctly.
 IP: [ Logged ]
Ronnie
Group: Installer - Multi Role
Position: Hero Member
***


Karma: +9/-2
Offline Offline

Posts: 2485
« Reply #6 on: August 14, 2011, 07:32:46 PM »
further to this topic,

I'm looking for an OEM reader which can be built into a custom faceplate - can anyone recommend a UK based supplier able to offer technical support for integration into other products?
 IP: [ Logged ]
0 Members and 2 Guests are viewing this topic.
Print
Pages: [1] Go Up  
Versigo Forum  »  Trade Members  »  Trade Access  »  Topic: Biometrics
Jump to:  

Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC
© 2007 Versigo. All Rights Reserved.
Page created in 0.049 seconds with 19 queries.